Re: HMC and ASM

["Dave Snyder" <DSnyder@xxxxxxxx>]

I believe we at one point connected our HMC to the default ip address but 
then changed it. We are trying to connect via that same (the changed one) 
ip address and can ping it but not get to the ASM interface via the 
browser now, so that we can once again change it, Maybe we need to reset 
it - how do we do that without being in ASM.

Dave



From:
Lukas Beeler <lukas.beeler@xxxxxxxxxxxxxxxx>
To:
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Date:
08/24/2009 01:47 PM
Subject:
Re: HMC and ASM
Sent by:
midrange-l-bounces@xxxxxxxxxxxx



On Mon, Aug 24, 2009 at 18:58, Dave Snyder<DSnyder@xxxxxxxx> wrote:
> We have a ethernet cable connected from a laptop into the HMC #2 port 
and
> can ping the HMC IP address, but can not connect to ASM using the https
> web address of the HMC. What else should I check to try and figure out 
why
> we can not get to ASM

ASMI runs on the FSP, not on the HMC. The default IP of ASMI on the
second HMC port is 192.168.3.147.

Be aware that there's a proxy on the HMC, which you can use to access
the ASMI through the HMC (by selecting the appropriate menu point in
the HMC webinterface).




NOTICE - This e-mail message is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this message, you are hereby notified that any dissemination, distribution or copying of this message is strictly prohibited. If you have received this message in error, please notify the sender by e-mail or telephone and delete the original and all copies of this message immediately.  
www.ephratanationalbank.com