Re: Migrate twinax console to LAN console V5R2

[Jim Oberholtzer <midrangel@xxxxxxxxxxxxxxxxx>]

That option was not added until V5R4 I think.  You need to use the front 
panel (65+21) to change the console.  I think the link sent earlier has 
the exact instructions.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 7/2/2012 11:28 AM, Lindstrom, Scott R. wrote:
> Jack - this is opt 8 in V5R2:
>
> 8. Work with service tools user IDs
>
> Which brings me here:
>
>                    Work with Service Tools User IDs
>                                                           System:
> pe option, press Enter.
> 1=Create              2=Change password      3=Delete
> 4=Display             5=Enable               6=Disable
> 7=Change privileges   8=Change description
>
> There is no option to set the console type.  Is it somewhere else in V5R2?
>
> Scott
>
>
> -----Original Message-----
> From:midrange-l-bounces@xxxxxxxxxxxx  [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jack Kingsley
> Sent: Monday, July 02, 2012 11:25 AM
> To: Midrange Systems Technical Discussion
> Subject: Re: Migrate twinax console to LAN console V5R2
>
> start SST, take opiton 8 (Work with service tools user IDs and Devices),
> can you do anything with option 3 that would allow you to change it to lan
> console.
>
>
>
> On Mon, Jul 2, 2012 at 12:17 PM, Lindstrom, Scott R.<
> Scott.Lindstrom@xxxxxxxxxxxxxx>  wrote:
>
> > >  Sorry - that link was valid before.  It is a PDF document that gives the
> > >  steps to do this V5R4M5 and beyond.
> > >
> > >  Scott
> > >
> > >
> > >  -----Original Message-----
> > >  From:midrange-l-bounces@xxxxxxxxxxxx  [mailto:
> > >  midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Lindstrom, Scott R.
> > >  Sent: Monday, July 02, 2012 11:16 AM
> > >  To:MIDRANGE-L@xxxxxxxxxxxx
> > >  Subject: Migrate twinax console to LAN console V5R2
> > >
> > >  I have a V5R2 system that I need to get over to LAN console so we can add
> > >  some LPAR's.  I found this document:
> > >
> > >
> > >  http://www-01.ibm.com/support/docview.wss?uid=nas179a308457dd4c6c18625770e0057530f
> > >
> > >  But it covers V5R4M5 and beyond; it directs you into SST option 8 "user
> > >  IDs and*devices*" to set the console type to '3' Ops Console.  In V5R2 the
> > >  'devices' part is not there.
> > >
> > >  Does anyone know how I change the console type from Twinax to Ops LAN
> > >  console in V5R2?
> > >
> > >  Scott Lindstrom
> > >
> > >  --