|
wrote:
The procedure in the V5R4 Info center is essentially the same as it was--
in V5R2, difference being some of the options for setting up the console
device and the user. You may have to hunt/peck for those. Also, I
don't remember exactly but there was a change where you could get to
those functions with SST, at V5R2 they may only be available from DST.
I would try a function 21 to see if the DST presented that way will give
you the options, otherwise you may have to IPL into DST to set it up.
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects
On 7/2/2012 12:56 PM, Lindstrom, Scott R. wrote:
Unfortunately that link is for:on behalf of Jim Oberholtzer [midrangel@xxxxxxxxxxxxxxxxx]
Software version:
5.4.5, 6.1, 6.1.1,
V5R4M0, V5R4M5, V6R1M0, V6R1M1
I am V5R2.
________________________________________
From:midrange-l-bounces@xxxxxxxxxxxx [midrange-l-bounces@xxxxxxxxxxxx]
Sent: Monday, July 02, 2012 11:36 AMV5R2?
To: Midrange Systems Technical Discussion
Subject: Re: Migrate twinax console to LAN console V5R2
That option was not added until V5R4 I think. You need to use the front
panel (65+21) to change the console. I think the link sent earlier has
the exact instructions.
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects
On 7/2/2012 11:28 AM, Lindstrom, Scott R. wrote:
Jack - this is opt 8 in V5R2:
8. Work with service tools user IDs
Which brings me here:
Work with Service Tools User IDs
System:
pe option, press Enter.
1=Create 2=Change password 3=Delete
4=Display 5=Enable 6=Disable
7=Change privileges 8=Change description
There is no option to set the console type. Is it somewhere else in
midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jack Kingsley
Scott
-----Original Message-----
From:midrange-l-bounces@xxxxxxxxxxxx [mailto:
Devices),Sent: Monday, July 02, 2012 11:25 AM
To: Midrange Systems Technical Discussion
Subject: Re: Migrate twinax console to LAN console V5R2
start SST, take opiton 8 (Work with service tools user IDs and
to lancan you do anything with option 3 that would allow you to change it
that gives theconsole.
On Mon, Jul 2, 2012 at 12:17 PM, Lindstrom, Scott R.<
Scott.Lindstrom@xxxxxxxxxxxxxx> wrote:
> Sorry - that link was valid before. It is a PDF document
Scott R.> steps to do this V5R4M5 and beyond.
>
> Scott
>
>
> -----Original Message-----
> From:midrange-l-bounces@xxxxxxxxxxxx [mailto:
> midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Lindstrom,
so we can add> Sent: Monday, July 02, 2012 11:16 AM
> To:MIDRANGE-L@xxxxxxxxxxxx
> Subject: Migrate twinax console to LAN console V5R2
>
> I have a V5R2 system that I need to get over to LAN console
http://www-01.ibm.com/support/docview.wss?uid=nas179a308457dd4c6c18625770e0057530f> some LPAR's. I found this document:
>
>
>
option 8 "user>
> But it covers V5R4M5 and beyond; it directs you into SST
Console. In V5R2 the> IDs and*devices*" to set the console type to '3' Ops
to Ops LAN> 'devices' part is not there.
>
> Does anyone know how I change the console type from Twinax
----> console in V5R2?
>
> Scott Lindstrom
>
> --
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
midrange.com
