RE: Migrate twinax console to LAN console V5R2

Jim - I am in a function 21 now. I got into DST and changed to LAN console. But so far when I config a session on the PC I get:

The Local configured console name 127.0.0.0 does not match the actual configured console name <mypcnname>.

Not sure why it's saying that. I have assigned the IP address ending in .60 to the AS/400, the one ending in .61 to the PC, and am trying to assign the one ending in .62 to the AS/400 console card in slot C05.

scott

________________________________________
From: midrange-l-bounces@xxxxxxxxxxxx [midrange-l-bounces@xxxxxxxxxxxx] on behalf of Jim Oberholtzer [midrangel@xxxxxxxxxxxxxxxxx]
Sent: Monday, July 02, 2012 1:14 PM
To: Midrange Systems Technical Discussion
Subject: Re: Migrate twinax console to LAN console V5R2

The procedure in the V5R4 Info center is essentially the same as it was
in V5R2, difference being some of the options for setting up the console
device and the user. You may have to hunt/peck for those. Also, I
don't remember exactly but there was a change where you could get to
those functions with SST, at V5R2 they may only be available from DST.
I would try a function 21 to see if the DST presented that way will give
you the options, otherwise you may have to IPL into DST to set it up.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 7/2/2012 12:56 PM, Lindstrom, Scott R. wrote:

Unfortunately that link is for:

Software version:​
5.4.5, 6.1, 6.1.1,
V5R4M0, V5R4M5, V6R1M0, V6R1M1

I am V5R2.

________________________________________
From:midrange-l-bounces@xxxxxxxxxxxx [midrange-l-bounces@xxxxxxxxxxxx] on behalf of Jim Oberholtzer [midrangel@xxxxxxxxxxxxxxxxx]
Sent: Monday, July 02, 2012 11:36 AM
To: Midrange Systems Technical Discussion
Subject: Re: Migrate twinax console to LAN console V5R2

That option was not added until V5R4 I think. You need to use the front
panel (65+21) to change the console. I think the link sent earlier has
the exact instructions.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 7/2/2012 11:28 AM, Lindstrom, Scott R. wrote:

Jack - this is opt 8 in V5R2:

8. Work with service tools user IDs

Which brings me here:

Work with Service Tools User IDs
System:
pe option, press Enter.
1=Create 2=Change password 3=Delete
4=Display 5=Enable 6=Disable
7=Change privileges 8=Change description

There is no option to set the console type. Is it somewhere else in V5R2?

Scott


-----Original Message-----
From:midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jack Kingsley
Sent: Monday, July 02, 2012 11:25 AM
To: Midrange Systems Technical Discussion
Subject: Re: Migrate twinax console to LAN console V5R2

start SST, take opiton 8 (Work with service tools user IDs and Devices),
can you do anything with option 3 that would allow you to change it to lan
console.



On Mon, Jul 2, 2012 at 12:17 PM, Lindstrom, Scott R.<
Scott.Lindstrom@xxxxxxxxxxxxxx> wrote:

> Sorry - that link was valid before. It is a PDF document that gives the
> steps to do this V5R4M5 and beyond.
>
> Scott
>
>
> -----Original Message-----
> From:midrange-l-bounces@xxxxxxxxxxxx [mailto:
> midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Lindstrom, Scott R.
> Sent: Monday, July 02, 2012 11:16 AM
> To:MIDRANGE-L@xxxxxxxxxxxx
> Subject: Migrate twinax console to LAN console V5R2
>
> I have a V5R2 system that I need to get over to LAN console so we can add
> some LPAR's. I found this document:
>
>
> http://www-01.ibm.com/support/docview.wss?uid=nas179a308457dd4c6c18625770e0057530f
>
> But it covers V5R4M5 and beyond; it directs you into SST option 8 "user
> IDs and*devices*" to set the console type to '3' Ops Console. In V5R2 the
> 'devices' part is not there.
>
> Does anyone know how I change the console type from Twinax to Ops LAN
> console in V5R2?
>
> Scott Lindstrom
>
> --

--

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.