RE: SNDM Command -- MIDRANGE-L

Clay,

I do not have QSECOFR authority, but I was able to install everything by using his installation guide. I then did a EDTLIBL and added the library. I am assuming maybe I should have done ADDLIBLE? Joe mentioned in a previous email that there is an undocumented step after the STRREXPRC SRCMBR(MAKE). He said that I should "move" the compiled objects from QTEMP to the library SMTP. Is that what you also did?

Thanks!
Kari

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Clay B Carley
Sent: Friday, October 25, 2013 8:21 AM
To: Midrange Systems Technical Discussion
Subject: Re: SNDM Command

Hi Kari,

I'm not sure if it matters, but during installation, I was logged in as QSECOFR; coming from my Linux background it seemed to make sense.

Also, the make process STRREXPRC SRCMBR(MAKE) took some time on my 170; it did tell me when it was complete though. My system is at V5R2.

Good luck!
Clay

On 10/25/2013 06:49 AM, Kari Zeglin wrote:

Thank you Clay :) I am going to reinstall today and be sure to add SMTP to my library list.

Thank you again!
Kari

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Clay B Carley
Sent: Thursday, October 24, 2013 9:00 PM
To: Midrange Systems Technical Discussion
Subject: Re: SNDM Command

I just went through the install according to the directions on the website.
http://homepage1.nifty.com/uzaemon/sndm_install.html

Everything worked out OK, but I had the same error as you did when I finished.

I added "SMTP" to the library list as that's where it is installed according to those instructions, and everything is now working as you would expect.

Good luck,
Clay Carley

On 10/24/2013 01:45 PM, Kari Zeglin wrote:

I'm very sorry about that. I think I have fried my brain from learning so much, including trying this today! Thank you all for your help. I will start working on getting the program and the command together. I FTP-ed the SNDM and must have missed something.. Thank you all again.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jeff Crosby
Sent: Thursday, October 24, 2013 2:41 PM
To: Midrange Systems Technical Discussion
Subject: Re: SNDM Command

Your'e not hearing us.

There needs to be 2 objects named SNDM:

1) a command
2) a program

You have the command. What you don't have is the program. A command by itself is a nothing. A command is simply a way to execute a program.

On Thu, Oct 24, 2013 at 4:35 PM, Kari Zeglin <Kari.Zeglin@xxxxxxxxxxx>wrote:

When I do the WRKOBJ that you stated I end up with (Cannot find
object to match specified name.) If I just do a WRKOBJ OBJ(SNDM) I
see SNDM in the library SMTP. I tried copying that from the WRKOBJ
menu into my personal library and the same error happens.

The CMD object is NOT your issue. The command is failing to locate
the

PGM object it calls. WRKOBJ *ALLUSR/SNDM *PGM and see if it's
really on your >system and if so make sure that the library it's in
is in your LIBL

Thanks,
Tommy Holden

From: Kari Zeglin <Kari.Zeglin@xxxxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Date: 10/24/2013 03:25 PM
Subject: RE: SNDM Command
Sent by: midrange-l-bounces@xxxxxxxxxxxx

If I copy the command and let's say put it in my library, would that
solve the problem I am having?

It does in fact say *LIBL, but when I do a WRKOBJ it shows the
command

SNDM in library SMTP.

crazy thought. Do a DSPCMD SNDM and see if it says *LIBL for the
program

to run or points to a specific library.

Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600
Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com

From: Jeff Crosby <jlcrosby@xxxxxxxxxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Date: 10/24/2013 04:10 PM
Subject: Re: SNDM Command
Sent by: midrange-l-bounces@xxxxxxxxxxxx

Don't forget that the command and the program are 2 different things.

The _command_ might exist, but not the _program_.

On Thu, Oct 24, 2013 at 3:54 PM, Kari Zeglin
<Kari.Zeglin@xxxxxxxxxxx>wrote:

Yes I believe that I do because when I do EDTLIBL I see that
library on the list.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:
midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jack Kingsley
Sent: Thursday, October 24, 2013 1:53 PM
To: Midrange Systems Technical Discussion
Subject: Re: SNDM Command

do you have the library in your library list.

On Thu, Oct 24, 2013 at 3:40 PM, Kari Zeglin
<Kari.Zeglin@xxxxxxxxxxx

wrote:

I believe that I have the correct email forum.. Sorry if I am

incorrect.

I just loaded the SNMP command from Uzaemon (
http://homepage1.nifty.com/uzaemon/) and am having trouble with it.
From what I have researched he recently closed down his forums
due to inactivity. Anyway I am trying to email from a CLLE. This is my code:

SNDM FROM('XXX@xxxxxxx') TO(('YYY@xxxxxxxxx'))
FILE(KZEGLIN/QTSTSRC)
SUBJECT('TESTING!!') SMTPHOST('smtp.host.com')

And receive 'Program SNDM not found in library *LIBL'. Thing is, I
used EDTLIBL and I do have the library that contains the command
in my list (SMTP). I have also tried the same code on a command
line and I also get the same error. I am wondering what must I be
doing wrong to cause this error?

Kari Zeglin

Our virtues and our failings are inseparable, like force and matter.
When they separate, man is no more.<
http://www.brainyquote.com/quotes/quotes/n/nikolatesl127335.html>
Nikola Tesla<
http://www.brainyquote.com/quotes/quotes/n/nikolatesl127335.html>

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please
take a moment to review the archives at
http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please
take a moment to review the archives at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing

list

To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please
take a moment to review the archives at
http://archive.midrange.com/midrange-l.

--
Jeff Crosby
VP Information Systems
UniPro FoodService/Dilgard
P.O. Box 13369
Ft. Wayne, IN 46868-3369
260-422-7531
www.dilgardfoods.com

The opinions expressed are my own and not necessarily the opinion of
my company. Unless I say so.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please
take a moment to review the archives at
http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please
take a moment to review the archives at
http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please
take a moment to review the archives at
http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please
take a moment to review the archives at
http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please
take a moment to review the archives at
http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please
take a moment to review the archives at
http://archive.midrange.com/midrange-l.

--
Jeff Crosby
VP Information Systems
UniPro FoodService/Dilgard
P.O. Box 13369
Ft. Wayne, IN 46868-3369
260-422-7531
www.dilgardfoods.com

The opinions expressed are my own and not necessarily the opinion of my company. Unless I say so.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.