Re: How much time would be needed to move an iSeries with the below rack config? -- MIDRANGE-L

10 hours is not unreasonable but you could likely do a hurry up and neaten the cables after it's all mounted and running. For the POWER equipment only, the actual de-cable, de-rack, re-rack, re-cable for a skilled and experienced technician with an assistant the right tools and carts might be done in 4 hours. This assumes proper planning, power staging, network staging, etc. But backups are still HIGHLY recommended.

Also you didn't say how many CABLES are conencted to all those I/O drawers. :-)

- Larry "DrFranken" Bolhuis

www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.

On 4/8/2016 3:27 PM, Steinmetz, Paul wrote:

Moving the rack is not an option.
Old racks are open racks from California Chassis.
New racks are enclosed racks from APC.
There is already one dedicated for the iSeries.

Depending on the amount of down time, I'm estimating 10 hours, which we cannot have, we may purchase new and have a new system in place.
I did get a quote from our BP.
Our current 8205-E6C is going on 5 years, so it's almost time.
I'm waiting to see the new offerings announced end of this month.

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Rob Berendt
Sent: Friday, April 08, 2016 3:02 PM
To: Midrange Systems Technical Discussion
Subject: Re: How much time would be needed to move an iSeries with the below rack config?

I would tend to move over the old rack. I'd have to be pretty darned enamoured with the airflow and PDU's on the new rack to do otherwise.

There's talk of us doing this same thing. Our current data center is packed into a tiny room near the bulk of conference area, etc and they want that and to move this data center to some other part of the building.

We did rerack everything when we went from Power 6 to Power 8 even though they came with nice new racks. The reason being the room was just too darn small to shift racks.

Just get a new box with all the latest hardware and stuff and unload/reload. :-)

Rough guess: 30 minutes / unit.

Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com

From: "Steinmetz, Paul" <PSteinmetz@xxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'"
<midrange-l@xxxxxxxxxxxx>
Date: 04/08/2016 02:48 PM
Subject: How much time would be needed to move an iSeries with the
below rack config?
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>

We're relocating are data center, 60 feet away, 2nd and 3rd quarter.
How much time do you think it would take to relocate an iSeries.
Rack details below, 15 items.
New rack in place, power ready.

Estimated times
Full System save
Power down
Un-cable
Un-rack
Move
Re-rack
Re-cable
Power up

Rack 14 in PSI Data Center 01
42 Rack 14 Switch (Catalyst 4948)
41 Firewall 14-1 (2800 Router)
40 Firewall 14-2 (2800 Router)
39 ATS 14-1 (AP7941)
38 ATS 14-2 (AP7941)
37 Fiber Switch 14-1 (300 Fiber Switch)
36
35 IBM 3573 Library
34
33
32
31
30
29
28
27
26
25
24
23
22
21 7316-TF3 6235P, Flat Panel Console Kit
20 HMC 7042-CR6 Rack-mounted Hardw.Mgmt.Console
19 7216-1U2 Multi Media Enclosure
18 5887 EXP24S SFF Gen2-bay Drawer
17
16 5887 EXP24S SFF Gen2-bay Drawer
15
14
13 P7 8205-E6C Power 740
12
11
10
9
8 5877 12X I/O Drawer PCIe, No Disk (P7 PCI Expansion Bay)
7
6
5 5877 12X I/O Drawer PCIe, No Disk (P7 PCI Expansion Bay)
4
3
2
1

Thank You
_____
Paul Steinmetz
IBM i Systems Administrator

Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071

610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home

psteinmetz@xxxxxxxxxx
http://www.pencor.com/