Ordered. They even suggested the punch tool to go with it. I have a punch
tool already, but it's buried in a box in our storage unit. It's simpler to
get a second one. :-)
Eddie died a while back. I gave it to Steve Landess when we moved here in
2013. Apparently, he left it unplugged too long, and it wouldn't fire back
up. C'est la vie.
I've survived 2 tornadoes in Minnesota, multiple earthquakes in San
Francisco, and now a hurricane. I am thinking that I've hit the Trifecta!
Thanks for the info. Time to get out the copper sulfate spray to keep the
mold away.
Paul Nelson
Cell 708-670-6978
Office 409-267-4027
nelsonp@xxxxxxxxxxxxx
-----Original Message-----
From: DrFranken [mailto:midrange@xxxxxxxxxxxx]
Sent: Friday, September 01, 2017 6:46 PM
To: Midrange Systems Technical Discussion; Paul Nelson
Subject: Re: After Harvey
https://www.amazon.com/InstallerParts-Cat-5E-Junction-Shielded-Outdoor/dp/B0
08NCCHC6/ref=sr_1_16?ie=UTF8&qid=1504309276&sr=8-16&keywords=110+block
This is exactly what you want. Existing cable on one side new cable on
the other side. I would put it in a box you can get at in case you need
to. It's best if you have a 110 punch tool but for a one off like this
two small screwdrivers can work. Don't push the screwdriver in the slot
the wire goes into though. Instead one on each side so the wire is
forced into the slot.
Hopefully Eddie survived!
- Larry "DrFranken" Bolhuis
www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.
On 9/1/2017 6:02 PM, Paul Nelson wrote:
Thanks to 4-5 inches of water, I have now removed all of the lower 4 feet
of
drywall in my office. My Ethernet cable has a jack on what I consider the
wrong side of the room, and now that the studs are exposed, I'm planning
to
relocate the jack to the other side of the room.
Can anybody point me to a simple splicing kit?
Thanks
Paul Nelson
Cell 708-670-6978
Office 409-267-4027
nelsonp@xxxxxxxxxxxxx
midrange.com
