Rob:

Unless your upgrading a test box I would not want to be near the first of
the group that puts up 3.1.x.x in VIOS. I've got 2.2.6.32 running most
everywhere now and it's solid. I'll wait for the .20 update at least before
I consider it in a production environment.

As to the upgrade, the article you cite is so full of AIX and VIOS are the
only OS under the planet that it makes it nearly worthless. How many IBM i
shops have a fully functional NIM server up and running? Very low
percentage with a decimal point in front.

I'll do the upgrade on my own system most likely next week. I will do the
double bump, upgrade to 3.1.0.0 first then apply the fixpack to 3.1.0.10.
Figure it's like loading or upgrading IBM i then putting on the PTFs.

The process is reasonably straight forward as you have done before, just
check out the pre-requisites a bit harder and a slightly different command.
Why they are forcing a backup and restore I have not yet figured out.

--
Jim Oberholtzer
Agile Technology Architects

-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxx> On Behalf Of Rob Berendt
Sent: Wednesday, December 05, 2018 5:24 PM
To: midrange-l@xxxxxxxxxxxx
Subject: Upgrading VIOS from 2.something to 3.something.

I am at vios 2.2.6.31.
I want to get up to the latest level of 3.
I figured I would upgrade to 2.2.6.32 first.

I've done a few of these within level 2. I have the steps down pretty good.
Going to 3 is a whole different animal. Kind of like the difference between
applying PTF's and doing a release upgrade. Instead of updateios you use
viosupgrade.

<snip>
Upgrading from VIOS version 2.2.4 and above The VIOS must first be upgraded
to 3.1.0.00 before the 3.1.0.10 update can be applied. To learn more about
how to do that, please read the information provided at
https://www.ibm.com/support/knowledgecenter/en/9009-42A/p9hb1/p9hb1_vios_mig
rate_viosupgrade_methods.htm
</snip>

A wiki article is at
https://www.ibm.com/developerworks/community/wikis/home?lang=en-us#!/wiki/Po
wer%20Systems/page/Virtual%20IO%20Server%20(VIOS)%20upgrade%20method%20using
%20mksysb%20install%20and%20viosbr


Does anyone have any "real world" examples? Or a cheat sheet they follow?

The documentation on updateios is pretty good compared to this.

Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.