Re: Configuration Kyocera MA 3005 -- MIDRANGE-L

Michael,
Assuming you have not found a solution yet? It's been years but have worked
long ago w Kyocera printers... I've been all over the Kyocera site to get
real specs for a "Kyocera MA 3005" - There are other models of MA, and
other numbers but cannot match that description. There is reference in
some models with a close description of an emulation mode and about 8
options, Closest is HP Laserjet since you are using a HP driver - and i
would second a prev suggestion to use HPCOLORLJ instead of HP4 type model.
All the type models for color printers in
https://www.ibm.com/support/pages/information-printers-kyocera-document-solutions-kyocera-mita-and-copystar
are drivers for color models.

And finally - can we see the CRTPRTF command you used (or a dspfd of it)
and any OVRPRTF ?

Jim Franz

On Thu, Mar 7, 2024 at 1:33 PM Michael Mayer <michael.mayer@xxxxxxxxxxxxx>
wrote:

I lean towards what Vern mentioned. The printer is working. It might be
something
having to do with the MFRTYPMOD parm.

I googled a couple of different phrases. A lot of them came back with
perhaps an internal printer setting or Kyocera software ???
I found this.
https://www.kyoceradocumentsolutions.com/sg/en/products/business-application/easy-lock.html
It might lead to an answer.

Respectfully,
Michael Mayer
IBM i on Power System Admin
ERMCO-ECI
2225 Industrial Rd
Dyersburg, Tennessee 38024
Office and OnCall: 731.676.4318
Cell: 518.641.8906
Email: michael.mayer@xxxxxxxxxxxxx
https://www.ermco-eci.com/
IBM i Personal Blog: https://ibmireference.blogspot.com/
"Success is not final. Failure is not fatal. It is the courage to continue
that counts".

2. Configuration Kyocera MA 3005 (Michael Mayer)
3. R: Configuration Kyocera MA 3005 (gio.cot via MIDRANGE-L)
4. Re: R: Configuration Kyocera MA 3005
(VERNON HAMBERG Owner via MIDRANGE-L)

----------------------------------------------------------------------

------------------------------

message: 2
date: Thu, 7 Mar 2024 16:03:54 +0000
from: Michael Mayer <michael.mayer@xxxxxxxxxxxxx>
subject: Configuration Kyocera MA 3005

Via my IBM i Reference Pages Blog (on my signature) and went to the "Sites
to use on the job" page.
Then opened this ... https://www.ibm.com/support/pages/node/644669
Then opened the Kyocera printer page and could not locate that model.
https://www.ibm.com/support/pages/information-printers-kyocera-document-solutions-kyocera-mita-and-copystar
MM

Respectfully,
Michael Mayer
IBM i on Power System Admin
ERMCO-ECI
2225 Industrial Rd
Dyersburg, Tennessee 38024
Office and OnCall: 731.676.4318
Cell: 518.641.8906
Email:?michael.mayer@xxxxxxxxxxxxx
https://www.ermco-eci.com/
IBM i Personal Blog: https://ibmireference.blogspot.com/
"Success is not final. Failure is not fatal. It is the courage to continue
that counts".

3. Configuration Kyocera MA 3005 (gio.cot via MIDRANGE-L)

message: 3
date: Thu, 7 Mar 2024 12:22:18 +0100
from: "gio.cot via MIDRANGE-L" <midrange-l@xxxxxxxxxxxxxxxxxx>
subject: Configuration Kyocera MA 3005

Hi all

I need to configure Kyocera MA 3005 IBM to print with Colored overlay ;

below the configuration that with Blank and withe Overlay works; instead
with Colored overlay i receive CPF3397 and the writer ends

Can some help to configure so that also with Colored overlay it works?

Thanks in advance

Actual Configuration

Unit description . . . . . . . . : DEVD PRTES

Option . . . . . . . . . . . . . : OPTION *ALL

Unit category . . . . . . . : *PRT

Unit class . . . . . . . . . . . : DEVCLS *LAN

Unit type . . . . . . . . . . . . : TYPE 3812

Unit model . . . . . . . . . . : MODEL 1

LAN connection . . . . . . . . . : LANATTACH *IP

Port number . . . . . . . . . . . : PORT 9100

Physical connection . . . . . . . : ATTACH *DIRECT

Inline to IPL . . . . . . . . . . : ONLINE *YES

Font . . . . . . . . . . . . : FONT

Identifier . . . . . . . . . : 011

Size in points . . . . . . : *NONE

Formfeed . . . . . : FORMFEED *AUTOCUT

Drawer for separators . . . . . : SEPDRAWER *FILE

Separator program . . . . . . . : SEPPGM *NONE

Library . . . . . . . . . . . . :

Printer error message . . : PRTERRMSG *INQ

Message queue . . . . . . . . . . : MSGQ *CTLD

Current message queue . . . . . . : QSYSOPR

Library . . . . . . . . . . . . : QSYS

Date of last activity . . . . . . . :

Activation timer . . : ACTTMR 170

Inactivity timer . . . . : INACTTMR *SEC15

Line speed . . . . . . . : LINESPEED 19200

Word length . . . . . . . . . : WORDLEN 8

Parity type . . . . . . . . . . : PARITY *

Stop bits . . . . . . . . . . : STOPBITS 1

Transform print host . . . : TRANSFORM *YES

Manufacturer type and model . . : MFRTYPMDL *HP4

Paper origin 1 . . . . . . . . . : PPRSRC1 *A4

Paper origin 2 . . . . . . . . . : PPRSRC2 *A4

Origin of envelopes . . . . . . . : ENVELOPE *NUMBER10

899 ASCII codepage support . . . : ASCII899 *NO

Image configuration . . . . : IMGCFG *NONE

Character identifier . . . . . : CHRID *SYSVAL

Remote location . . . . . . : RMTLOCNAME

Name or address . . . . . . . . : 192.xx

Ogg. personaliz. workstation . . : WSCST *NONE

User-defined object . . . : USRDFNOBJ *NONE

Object type . . . . . . . . . . : *NONE

Data conversion program . . : USRDTATFM *NONE

System control prog. . . . . : SYSDRVPGM *IBMSNMPDRV

Assigned to:

Job name . . . . . . . . . . . : QSYSARB

User . . . . . . . . . . . . . : QSYS

Number . . . . . . . . . . . . . : 324505

Published . . . . . . . . . . . . : *NO

Unit description . . . . . . . . : DEVD PRTES7170W

Option . . . . . . . . . . . . . : OPTION *ALL

Unit category . . . . . . . : *PRT

Publication information . . : PUBLISHINF

Duplex support . . . . . . . . : *UNKNOWN

Support color . . . . . . . . : *UNKNOWN

Black pages per minute . . . . . : *UNKNOWN

Color pages per minute . . . . : *UNKNOWN

Location . . . . . . . . . . . : *BLANK

Supported data streams . . . : *UNKNOWN*ALL

Unit category . . . . . . . :

------------------------------

message: 3
date: Thu, 7 Mar 2024 17:54:53 +0100
from: "gio.cot via MIDRANGE-L" <midrange-l@xxxxxxxxxxxxxxxxxx>
subject: R: Configuration Kyocera MA 3005

Hi Michael , so you think that we can?t use this printer connected to IBM
i ? keep in mind that with the actual configuration we can print, the only
problemi s that we are not able to print colored document .. pheraps i was
wron on creating overlay ??

Thanks

Da: gio.cot [mailto:gio.cot@xxxxxxxxxxx]
Inviato: gioved? 7 marzo 2024 12:22
A: 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxxxxxxxx>
Oggetto: Configuration Kyocera MA 3005

Hi all

I need to configure Kyocera MA 3005 IBM to print with Colored overlay ;

below the configuration that with Blank and withe Overlay works; instead
with Colored overlay i receive CPF3397 and the writer ends

Can some help to configure so that also with Colored overlay it works?

Thanks in advance

Actual Configuration

Unit description . . . . . . . . : DEVD PRTES

Option . . . . . . . . . . . . . : OPTION *ALL

Unit category . . . . . . . : *PRT

Unit class . . . . . . . . . . . : DEVCLS *LAN

Unit type . . . . . . . . . . . . : TYPE 3812

Unit model . . . . . . . . . . : MODEL 1

LAN connection . . . . . . . . . : LANATTACH *IP

Port number . . . . . . . . . . . : PORT 9100

Physical connection . . . . . . . : ATTACH *DIRECT

Inline to IPL . . . . . . . . . . : ONLINE *YES

Font . . . . . . . . . . . . : FONT

Identifier . . . . . . . . . : 011

Size in points . . . . . . : *NONE

Formfeed . . . . . : FORMFEED *AUTOCUT

Drawer for separators . . . . . : SEPDRAWER *FILE

Separator program . . . . . . . : SEPPGM *NONE

Library . . . . . . . . . . . . :

Printer error message . . : PRTERRMSG *INQ

Message queue . . . . . . . . . . : MSGQ *CTLD

Current message queue . . . . . . : QSYSOPR

Library . . . . . . . . . . . . : QSYS

Date of last activity . . . . . . . :

Activation timer . . : ACTTMR 170

Inactivity timer . . . . : INACTTMR *SEC15

Line speed . . . . . . . : LINESPEED 19200

Word length . . . . . . . . . : WORDLEN 8

Parity type . . . . . . . . . . : PARITY *

Stop bits . . . . . . . . . . : STOPBITS 1

Transform print host . . . : TRANSFORM *YES

Manufacturer type and model . . : MFRTYPMDL *HP4

Paper origin 1 . . . . . . . . . : PPRSRC1 *A4

Paper origin 2 . . . . . . . . . : PPRSRC2 *A4

Origin of envelopes . . . . . . . : ENVELOPE *NUMBER10

899 ASCII codepage support . . . : ASCII899 *NO

Image configuration . . . . : IMGCFG *NONE

Character identifier . . . . . : CHRID *SYSVAL

Remote location . . . . . . : RMTLOCNAME

Name or address . . . . . . . . : 192.xx

Ogg. personaliz. workstation . . : WSCST *NONE

User-defined object . . . : USRDFNOBJ *NONE

Object type . . . . . . . . . . : *NONE

Data conversion program . . : USRDTATFM *NONE

System control prog. . . . . : SYSDRVPGM *IBMSNMPDRV

Assigned to:

Job name . . . . . . . . . . . : QSYSARB

User . . . . . . . . . . . . . : QSYS

Number . . . . . . . . . . . . . : 324505

Published . . . . . . . . . . . . : *NO

Unit description . . . . . . . . : DEVD PRTES7170W

Option . . . . . . . . . . . . . : OPTION *ALL

Unit category . . . . . . . : *PRT

Publication information . . : PUBLISHINF

Duplex support . . . . . . . . : *UNKNOWN

Support color . . . . . . . . : *UNKNOWN

Black pages per minute . . . . . : *UNKNOWN

Color pages per minute . . . . : *UNKNOWN

Location . . . . . . . . . . . : *BLANK

Supported data streams . . . : *UNKNOWN*ALL

Unit category . . . . . . . :

------------------------------

message: 4
date: Thu, 07 Mar 2024 09:52:15 -0800
from: VERNON HAMBERG Owner via MIDRANGE-L
<midrange-l@xxxxxxxxxxxxxxxxxx>
subject: Re: R: Configuration Kyocera MA 3005

Hi Gio

If a printer is not in that list, it still might be something you can use
- already you have with a black&white overlay you are printing there. You
are using an older MFRTYPMDL, *HP4 = maybe try *HPCOLORJ.

But you are saying Host Print Transform *YES - there are limits to what
HPT can do, as documented here -
https://www.ibm.com/support/pages/capabilities-and-limitations-host-print-transform-hpt

This does say that HPT will print certain color components - graphic
images, I believe, you can read it to be sure.

Also, you gave us only the CPF3397 message - that only says that the
writer ended - the message 2nd level text says to look at the job log of
the writer to see why it ended - these final messages themselves are of no
help without the history of what happened before that.

Can you look at the writer job log and give us the messages that it has
before CPF3397?

Regards
Vern

On Thu, 7 Mar, 2024 at 10:54 AM, gio.cot via MIDRANGE-L <
midrange-l@xxxxxxxxxxxxxxxxxx> wrote:

To: 'midrange systems technical discussion'
Cc: gio.cot@xxxxxxxxxxx
Hi Michael , so you think that we can?t use this printer connected to IBM
i ? keep in mind that with the actual configuration we can print, the only
problemi s that we are not able to print colored document .. pheraps i was
wron on creating overlay ??

Thanks

Da: gio.cot [mailto:gio.cot@xxxxxxxxxxx<mailto:gio.cot@xxxxxxxxxxx>]
Inviato: gioved? 7 marzo 2024 12:22
A: 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxxxxxxxx
<mailto:midrange-l@xxxxxxxxxxxxxxxxxx>>
Oggetto: Configuration Kyocera MA 3005

Hi all

I need to configure Kyocera MA 3005 IBM to print with Colored overlay ;

below the configuration that with Blank and withe Overlay works; instead
with Colored overlay i receive CPF3397 and the writer ends

Can some help to configure so that also with Colored overlay it works?

Thanks in advance

Actual Configuration

Unit description . . . . . . . . : DEVD PRTES

Option . . . . . . . . . . . . . : OPTION *ALL

Unit category . . . . . . . : *PRT

Unit class . . . . . . . . . . . : DEVCLS *LAN

Unit type . . . . . . . . . . . . : TYPE 3812

Unit model . . . . . . . . . . : MODEL 1

LAN connection . . . . . . . . . : LANATTACH *IP

Port number . . . . . . . . . . . : PORT 9100

Physical connection . . . . . . . : ATTACH *DIRECT

Inline to IPL . . . . . . . . . . : ONLINE *YES

Font . . . . . . . . . . . . : FONT

Identifier . . . . . . . . . : 011

Size in points . . . . . . : *NONE

Formfeed . . . . . : FORMFEED *AUTOCUT

Drawer for separators . . . . . : SEPDRAWER *FILE

Separator program . . . . . . . : SEPPGM *NONE

Library . . . . . . . . . . . . :

Printer error message . . : PRTERRMSG *INQ

Message queue . . . . . . . . . . : MSGQ *CTLD

Current message queue . . . . . . : QSYSOPR

Library . . . . . . . . . . . . : QSYS

Date of last activity . . . . . . . :

Activation timer . . : ACTTMR 170

Inactivity timer . . . . : INACTTMR *SEC15

Line speed . . . . . . . : LINESPEED 19200

Word length . . . . . . . . . : WORDLEN 8

Parity type . . . . . . . . . . : PARITY *

Stop bits . . . . . . . . . . : STOPBITS 1

Transform print host . . . : TRANSFORM *YES

Manufacturer type and model . . : MFRTYPMDL *HP4

Paper origin 1 . . . . . . . . . : PPRSRC1 *A4

Paper origin 2 . . . . . . . . . : PPRSRC2 *A4

Origin of envelopes . . . . . . . : ENVELOPE *NUMBER10

899 ASCII codepage support . . . : ASCII899 *NO

Image configuration . . . . : IMGCFG *NONE

Character identifier . . . . . : CHRID *SYSVAL

Remote location . . . . . . : RMTLOCNAME

Name or address . . . . . . . . : 192.xx

Ogg. personaliz. workstation . . : WSCST *NONE

User-defined object . . . : USRDFNOBJ *NONE

Object type . . . . . . . . . . : *NONE

Data conversion program . . : USRDTATFM *NONE

System control prog. . . . . : SYSDRVPGM *IBMSNMPDRV

Assigned to:

Job name . . . . . . . . . . . : QSYSARB

User . . . . . . . . . . . . . : QSYS

Number . . . . . . . . . . . . . : 324505

Published . . . . . . . . . . . . : *NO

Unit description . . . . . . . . : DEVD PRTES7170W

Option . . . . . . . . . . . . . : OPTION *ALL

Unit category . . . . . . . : *PRT

Publication information . . : PUBLISHINF

Duplex support . . . . . . . . : *UNKNOWN

Support color . . . . . . . . : *UNKNOWN

Black pages per minute . . . . . : *UNKNOWN

Color pages per minute . . . . : *UNKNOWN

Location . . . . . . . . . . . : *BLANK

Supported data streams . . . : *UNKNOWN*ALL

Unit category . . . . . . . :

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx<mailto:
MIDRANGE-L@xxxxxxxxxxxxxxxxxx>
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx<mailto:
MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx>
Before posting, please take a moment to review the archives at
https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx<mailto:
support@xxxxxxxxxxxxxxxxxxxx> for any subscription related questions.

.

------------------------------

Subject: Digest Footer

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) digest list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives at
https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related
questions.

------------------------------

End of MIDRANGE-L Digest, Vol 23, Issue 205
*******************************************
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related
questions.