Re: Using UserID and Pawword with HTTP server(V5R1original)

[TAllen@xxxxxxxxxxxx]

Yes, it is 2 lower case v's.  That log will often point out config. errors.

Thanks,
Todd




                                                                           
             Rob Dixon                                                     
             <robertsdixon@gma                                             
             il.com>                                                    To 
             Sent by:                  "Web Enabling the AS400 / iSeries"  
             web400-bounces@mi         <web400@xxxxxxxxxxxx>               
             drange.com                                                 cc 
                                                                           
                                                                   Subject 
             2009-01-23 15:32          Re: [WEB400] Using UserID and       
                                       Pawword with HTTP server            
                                       (V5R1original)                      
             Please respond to                                             
             Web Enabling the                                              
              AS400 / iSeries                                              
             <web400@midrange.                                             
                   com>                                                    
                                                                           
                                                                           




Todd

I have now tried that and found the spool file but nothing seems untoward
and still nothing in the errorlog.  I assume that the letters were - V V
not
-W.



What

2009/1/23 <TAllen@xxxxxxxxxxxx>

> Will starting the HTTP server with the -vv option give you what you need?
>
> ex. STRTCPSVR SERVER (*HTTP) HTTPSVR(<INSTANCE_NAME> '-vv')
>
> I think the spool file is available under the QTMHHTTP user profile.
>
> Thanks,
> Todd
>
>
>
>
>
>             Rob Dixon
>             <robertsdixon@gma
>             il.com>                                                    To
>             Sent by:                  "Web Enabling the AS400 / iSeries"
>             web400-bounces@mi         <web400@xxxxxxxxxxxx>
>             drange.com                                                 cc
>
>                                                                   Subject
>             2009-01-23 15:04          Re: [WEB400] Using UserID and
>                                        Pawword with HTTP server (V5R1
>                                       original)
>              Please respond to
>              Web Enabling the
>              AS400 / iSeries
>              <web400@midrange.
>                   com>
>
>
>
>
>
>
> Matt
>
> Many thanks - I am researching to see if I can find such a log.  NOthing
> appears in the normal errorlog.
>
> Rob
>
> 2009/1/22 Haas, Matt (CL Tech Sv) <matt.haas@xxxxxxxxxxx>
>
> > It looks okay but like I said, I don't have any way to test anything.
You
> > may want to look in the InfoCenter and see if there is a way to get the
> > server to give you a trace log. I think the classic server can do that
> but I
> > don't remember. You may also find some information in the HTTP error
log
> but
> > I think what it shows isn't quite as useful at the Apache based server
> log.
> > Matt
> >
> > -----Original Message-----
> > From: web400-bounces@xxxxxxxxxxxx [mailto:web400-bounces@xxxxxxxxxxxx]
> On
> > Behalf Of Rob Dixon
> > Sent: Thursday, January 22, 2009 2:07 PM
> > To: Web Enabling the AS400 / iSeries
> > Subject: Re: [WEB400] Using UserID and Pawword with HTTP server (V5R1
> > original)
> >
> > Matt
> >
> > You must think me very rude not to have replied to you before but
somehow
> I
> > missed your kind post.  As I still have not solved the problem, I was
> > researching today and so came across your reply.
> >
> > Of course I tried your suggestion at once,
> >
> > my code is
> >
> >  Protection TestProt {
> >  PasswdFile %%SYSTEM%%
> >  Authtype      Basic
> >  ACLOverride Off
> >  PostMask All
> >  GetMask All
> >  ServerID www.erros.co.uk
> >  Userid    %%CLIENT%%
> >   }
> >  Protect /cgi-bin/stipple/* TestProt
> >  CGIMode %%EBCDIC%%
> >  PersistentCGITimeout 60 minutes
> >  MaxPersistentCGITimeout 60 minutes
> >    Exec  /cgi-bin/hello  /QSYS.LIB/E280CGIOBJ.LIB/hello
> >    Exec  /cgi-bin/stipple  /QSYS.LIB/E290PRDOBJ.LIB/e29
> >    Exec  /cgi-bin/e29rpp/*   /QSYS.LIB/E290PRDOBJ.LIB/E29RPP.PGM
> >
> > I have restarted the server but still no luck
> >
> > Does your memory go back far enough to suggest what I am doing wrong?
> >
> > Many thanks
> >
> > Rob
> >
> > 2009/1/13 Haas, Matt (CL Tech Sv) <matt.haas@xxxxxxxxxxx>
> >
> > > I had a minute to look at an old config and here is an example that
> > should
> > > work:
> > >
> > > Protection  TESTPROT  {
> > >     PasswdFile   %%SYSTEM%%
> > >     ACLOverride  Off
> > >     PostMask     All
> > >     GetMask      All
> > >     AuthType     BASIC
> > >     ServerID     some_name
> > >     UserID       %%CLIENT%%
> > >  }
> > >
> > > Protect        /cgi-bin/stipple/*          TESTPROT
> > >
> > > Note that I have no way to test this.
> > >
> > > Matt
> > >
> > > -----Original Message-----
> > > From: web400-bounces@xxxxxxxxxxxx
[mailto:web400-bounces@xxxxxxxxxxxx]
> > On
> > > Behalf Of Rob Dixon
> > > Sent: Tuesday, January 13, 2009 1:38 PM
> > > To: Web Enabling the AS400 / iSeries
> > > Subject: Re: [WEB400] Using UserID and Pawword with HTTP server (V5R1
> > > original)
> > >
> > > I saw it only again recently but I am not sure where.  I thought that
> it
> > > was
> > > on one of the sites I have been using to learn CGIDEV2 but I have
> looked
> > at
> > > the pages I have book marked recently, from Search400 and Easy400,
and
> I
> > > cannot find it.  I didn't dream it up.  If I come across it again, I
> will
> > > let you know.
> > >
> > > I had already tried the InfoCenter but can't find the answer.  I need
> to
> > > find a site with lots of configuration examples rather than simply
the
> > > syntax.
> > >
> > > Many thanks
> > >
> > > Rob
> > >
> > > 2009/1/13 Haas, Matt (CL Tech Sv) <matt.haas@xxxxxxxxxxx>
> > >
> > > > Rob,
> > > >
> > > > Where did you find it published that the Apache version isn't the
> best
> > > for
> > > > V5R1 (it does stink on V4R5)? I ran it there for several years
> without
> > > > problems. In fact, it made my life much, much easier since virtual
> > hosts
> > > > were easier to maintain.
> > > >
> > > > As far as configuring the Original server goes, I don't think I
have
> > any
> > > of
> > > > those configurations around any more. I know that I learned how to
> set
> > > all
> > > > of that up using the documentation from the InfoCenter. It may be
> worth
> > a
> > > > look there.
> > > >
> > > > Matt
> > > >
> > > > -----Original Message-----
> > > > From: web400-bounces@xxxxxxxxxxxx
> [mailto:web400-bounces@xxxxxxxxxxxx]
> > > On
> > > > Behalf Of Rob Dixon
> > > > Sent: Tuesday, January 13, 2009 11:38 AM
> > > > To: Web Enabling the AS400 / iSeries
> > > > Subject: Re: [WEB400] Using UserID and Pawword with HTTP server
(V5R1
> > > > original)
> > > >
> > > > Thanks Matt
> > > >
> > > > I am using the original HTTP server on this V5R1 box because I have
> > read
> > > > several well known published experts say that this is best on V5R1
> and
> > > > Apache should be left for V5R2 or for V5R3 when there is no choice.
> I
> > do
> > > > use it on a V5R3 box but, since I rarely need to change the
> > > configuration,
> > > > I
> > > > am even less skilled on that than on the Original server.
> > > >
> > > > I tried putting in a Protect statement but without success.  I did
> > > restart
> > > > the server.
> > > >
> > > > I already had a protection directive - please could you tell me
what
> > the
> > > > protec tstatement should say and where it should go?
> > > >
> > > > Many thanks
> > > >
> > > > Rob Dixon
> > > >
> > > > 2009/1/13 Haas, Matt (CL Tech Sv) <matt.haas@xxxxxxxxxxx>
> > > >
> > > > > Rob,
> > > > >
> > > > > First off, why are you still using the Original server? The
Apache
> > > based
> > > > > one is much, much better.
> > > > >
> > > > > To answer your question, you are missing the Protect statement.
> > > > >
> > > > > Matt
> > > > >
> > > > > -----Original Message-----
> > > > > From: web400-bounces@xxxxxxxxxxxx [mailto:
> > web400-bounces@xxxxxxxxxxxx]
> > > > On
> > > > > Behalf Of Rob Dixon
> > > > > Sent: Tuesday, January 13, 2009 10:26 AM
> > > > > To: Web Enabling the AS400 / iSeries
> > > > > Subject: [WEB400] Using UserID and Pawword with HTTP server (V5R1
> > > > original)
> > > > > I have got to the stage with my CGIDEV2 development where I now
> want
> > to
> > > > > work
> > > > > using User IDs.  According to the manual, including
> > > > >
> > > > >  Protection /cgi-bin/stipple/*   {
> > > > >   Authtype      Basic
> > > > >   Userid    %%CLIENT%%
> > > > >   PasswdFile %%SYSTEM%%
> > > > >  }
> > > > >
> > > > > in my  HTTPCFG file should do the trick but nothing happens.  I
> have
> > > put
> > > > > this ahead of my Exec statement which reads
> > > > >
> > > > > Map /cgi-bin/stipple/*
/QSYSLIB.LIB/E290PRDOBJ.LIB/E290G00000.PGM
> > > > > This exec statement works fine.
> > > > >
> > > > > I wish to use standard User profiles rather than a password file.
> > > > >
> > > > > Can anyone please tell me what I am doing wrong?
> > > > >
> > > > > Many thanks
> > > > >
> > > > > Rob Dixon
> > > > >
> > > > > www.erros.co.uk
> > > > > www.boarstall.com
> > > > > --



 
This communication and any transmitted documents are intended to be confidential. If there is a problem with this transmission, please contact the sender. If the reader of this message is not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.