Re: FW: Telnet on the AS400

[Carl Galgano <cgalgano@xxxxxxxxxxxxxxxxx>]

The big advantages in V4R2 for IP are:
DNS support
DHCP support
Dial up PPP suport.

As far as Telnet to the AS400.  It is pretty simple to configure.  I assume
you have either an ethernet or token ring card in your box and configured
an ethernet line.
Use the CFGTCP command to get to the configuration menu.  At least you need
to enter an interface (option 1) See Below:

                            Display TCP/IP Interface
    
                                                             System:
VAN400   
 Internet address . . . . . . . . . . . . . . . :   128.1.1.230
    
 Subnet mask  . . . . . . . . . . . . . . . . . :   255.255.255.0
    
 Line description . . . . . . . . . . . . . . . :   ETHLINE
    
 Line type  . . . . . . . . . . . . . . . . . . :   *ELAN
    
 Interface status . . . . . . . . . . . . . . . :   Active
    
 Type of service  . . . . . . . . . . . . . . . :   *NORMAL
    
 Maximum transmission unit  . . . . . . . . . . :   *LIND
    
 Automatic start  . . . . . . . . . . . . . . . :   *YES
    

    

    

    

    

    

    

    

    

    

    
 Press Enter to continue.
    

    
 F3=Exit   F12=Cancel
    

    

and option 12.

                       Change Local Domain and Host Names
    
                                                             System:
VAN400   
 Type choices, press Enter.
    

    
   Local domain name . . .   ediconsulting.com
    

    

    

    
   Local host name . . . .   VAN400
    

    

    

    

    

    

    

    

    

    

    

    

    

Bottom 
 F3=Exit   F12=Cancel
    

    

You may also need to identify youself and anyother host you wish to
communicate with in the host table option 10.

To start TCP/IP use the STRTCP command.  It should start all the various
TCP/IP servers.  You may wish to add that command to your system start up.

On the client side, you can telnet with any telnet client, however, it will
probably negotiate VT100 terminal emulation and the keyboard with map
funny.  Use a TN5250 (telnet 5250) client for best results.  CA/400 comes
with one, others include, RUMBA, PCOM, Reflections, Rally! and a piece of
shareware called Mochasoft that you can d/l on the www at www.mochasoft.dk.

Good luck.
Carl

At 03:06 PM 4/15/98 -0600, you wrote:
>Our LAN administrator posed this question to me and unfortunately I don't   
>have the answer. Can anyone out there help me/us out? We are running on   
>an AS/400 model 510, OS/400 V3R7. What are the advantages to waiting for   
>V4R2?  Thanks for your help...
>
>What would be required to set up a basic Telnet session on the 400. I   
>would want to run a simple Telnet terminal on a pc workstation that could   
>use TCP/IP via our LAN and connect to the 400. Is it even possible ??
>Thanks for any info
>
>Thanks for the assistance.
>
>Bill Megenity
>
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator: david@midrange.com
>+---
>
Carl J. Galgano
http://cgalgano.home.mindspring.com
mailto:cgalgano@ediconsulting.com
EDI Consulting Services, Inc.   
540 Powder Springs Street
Suite C19
Marietta, GA 30064
770-422-2995
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---