RE: Disaster Recovery, IPLing from SAVSYS tapes

["Alexei Pytel" <pytel@xxxxxxxxxx>]

One of the common problems when restoring from larger machine to a smaller
machine is that main storage pools are configured too large for a target
system. Could be it... - especially if manual IPL worked...

    Alexei Pytel
always speaking for myself

    Alexei Pytel
System Performance III
Dept HDL/006-2    Rochester, MN
(507) 253- 2867 or T/L 553-2867
email:  pytel@us.ibm.com




                      "Ward, Dennis"
                      <Dennis.Ward@AIG.c        To:       
"'midrange-l@midrange.com'"
                      om>                        <midrange-l@midrange.com>
                      Sent by:                  cc:
                      midrange-l-admin@m        Subject:  RE: Disaster 
Recovery, IPLing from SAVSYS tapes
                      idrange.com


                      10/04/2002 09:10
                      AM
                      Please respond to
                      midrange-l





no the machine has a 3490 tape drive

but will look up 3590

but when I used DST on startup nothing is failing

-----Original Message-----
From: Sean Porterfield [mailto:sporter@bestdist.com]
Sent: 04 October 2002 14:58
To: midrange-l@midrange.com
Subject: RE: Disaster Recovery, IPLing from SAVSYS tapes


>on the E50
>
>after signon as qsecofr then setting date etc
>
>I get b900 3590  non of our books have the b900 range in any ideas ?


I don't have a manual specific to that model, but in the 720 manual it says
that B900 is a permanent IO processor failure.  Is it a 3590 tape drive?
Seems that the last 4 digits on an SRC are the part number that is failing.

HTH

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.