Re: V5r3 Service Director

[Neil Palmer/DPS <neilp@xxxxxxxxxxx>]

If it ain't broke leave it alone.  :-)




Thomas Hauber <thauber@xxxxxxxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
2004/12/03 10:46



To
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
cc

Subject
Re: V5r3 Service Director






We have had Service Director working thru Universal Connection.  Is it 
necessary to run the UC wizard again from Navigator after upgrading to 
V5R3?

Thomas Hauber
Senior Programmer/Analyst
General Ribbon Corp.



Neil Palmer/DPS wrote:

>I had applied some PTF's about a month ago and Service Director setup 
>worked after Universal Connection was setup through Navigator, but GO 
>SERVICE failed from a green screen command line.  I hope that's fixed by 
>PTFs now.
>
>...Neil
>
>
>
>
>"Mike" <mshaw2456@xxxxxxxxxxx> 
>Sent by: midrange-l-bounces@xxxxxxxxxxxx
>2004/12/02 19:53
>
>
>
>To
>"'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
>cc
>
>Subject
>RE: V5r3 Service Director
>
>
>
>
>
>
>Neil,
>
>There are some PTF's required on the i5 side for iSeries Navigator and 
the
>Universal Connection Wizard.  I was not able to get it to work until I
>applied them......
> 
>Go to the APAR database for V5R3 and search Universal Connection Wizard 
>for
>more info.  There were at least a dozen APARs listed the last time I 
>looked.
>
>Regards,
>
>Mike Shaw
>
>-----Original Message-----
>From: midrange-l-bounces+mshaw2456=comcast.net@xxxxxxxxxxxx
>[mailto:midrange-l-bounces+mshaw2456=comcast.net@xxxxxxxxxxxx] On Behalf 
>Of
>Neil Palmer/DPS
>Sent: Thursday, December 02, 2004 3:38 PM
>To: Midrange Systems Technical Discussion
>Subject: Re: V5r3 Service Director
>
>If you mean you type GO SERVICE and get a ton of errors on green screen, 
>welcome to the club.
>If you are connecting through the web make sure you first go configure 
IBM 
>
>Universal Connection via iSeries Navigaptor.
>
>...Neil
>
>
>
>
>Wayne McAlpine <wmcalpine@xxxxxxxxxxxxxxxxx> 
>Sent by: midrange-l-bounces@xxxxxxxxxxxx
>2004/12/02 16:52
>
>
>
>To
>midrange-l@xxxxxxxxxxxx
>cc
>
>Subject
>Re: V5r3 Service Director
>
>
>
>
>
>
>The install of v5r3 seems to have removed 5798rzg and moved all of the 
>settings into the new product.  But I get numerous error when I try to 
>use the various commands.  Looks like a real can of worms.
>
>Condon, Mike wrote:
> 
>
>>What are the procedures for installing Service Director on v5r3?
>>