Buck wrote:
It might be some other device being turned on or off at that time of day
and it's changing the RF environment enough that you need to get on a
different channel. That device may not even be in the 3G frequency band
to affect your situation. Even stranger, it could be a multi-path
reflection from a door nearby - think about warehouse loading docks.

You need a friend with a spectrum analyser to find out for sure what's
happening.


Buck -

Interesting speculation. You could be onto something there.

When I was working at my very first job as a programmer on a S/34 at Tyler
Refrigeration Corporation, the service parts department had a terminal and
printer that was on a 2000-foot twinax run. Every day at around 3:00 pm,
the terminal and printer would go down mysteriously, then work sporadically
during the afternoon.

One day I decided to trace out the route of the cable in the overhead, and
happened upon a huge TIG welder (not in use) in the plant that was located
directly underneath the twinax welder. I asked one of the supervisors when
that machine was turned on, and he indicated that it was currently only used
on the second shift, and was powered up each day at 3:00 pm.

The welder was causing the interference, so the only solution was to
re-route the twinax cable...

- sjl





As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.