RE: Attempting to map a drive from home to AS/400 IFS directory

["Allen" <rallen@xxxxxxxxxxx>]

Thinks for all the info so far. 
This sounds like it is not a simple project.
I am going to have to do some reading on this topic before
jumping into a VPN

I do not want to have to hire a Network guy to maintain the
VPN 

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Josh
Diggs
Sent: Thursday, March 15, 2007 4:13 PM
To: Midrange Systems Technical Discussion
Subject: RE: Attempting to map a drive from home to AS/400
IFS directory

For a quick and dirty VPN solution, I've had success with
purchasing a pair of low end consumer grade VPN routers.  In
my limited experience, it is much easier to configure
similar settings on both ends of the connection than to try
to match settings in disparate products.  Another
consequence of this approach is that you're connection can
be set to be always available.  This is good for ease of
use, but bad for security.

A more secure and ultimately better solution is to use a
more robust firewall/VPN package whether appliance or
software based.  What you probably want to shop for is
something that uses a modern encryption method, and does not
take a network engineer to set up and maintain.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Allen
Sent: Thursday, March 15, 2007 12:40 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Attempting to map a drive from home to AS/400
IFS directory



Currently our ISP is Bellsouth (DSL Business Account)

In the past we have not really done anything remotely so we
have just been using the Standard Netopia router with a Dell
Switch for accessing the internet and sending emails.

In the past we have not had any need to access our servers
or our iSeries or AS/400's.
But starting this year we would like have remote access but
at the same time we do not want to open our network up being
hacked. 

If we need to purchase some equipment such as firewall/vpn
appliance or Router etc. then that is possible.


John


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Wayne
McAlpine
Sent: Thursday, March 15, 2007 3:14 PM
To: midrange-l@xxxxxxxxxxxx
Subject: Re: Attempting to map a drive from home to AS/400
IFS directory

Allen, tell us a little more about your hardware and your
ISP.  Do you 
have a Cisco router/firewall?  If so, I believe the VPN
software is 
included with the hardware.

Allen wrote:
> Sounds like I may need to contract this out.
>
> Anyone on this list have the experience and desire to set
> this up for us (remotely) please email me offline
>
> jallen@xxxxxxxxxxx
>
> John
>
>
> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx
> [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Tom
> Liotta
> Sent: Thursday, March 15, 2007 3:24 PM
> To: midrange-l@xxxxxxxxxxxx
> Subject: Re: Attempting to map a drive from home to AS/400
> IFS directory
>
> Allen wrote:
>
> > I have never setup a VPN
> >
> > Is this difficult?
> > Is there an easy to follow document explaining the setup
> > process?
>
> John:
>
> The _first_ thing you need to do is verify with your ISP
if
> VPN is 
> allowed for your account. Some ISPs don't enable VPN for
> personal 
> accounts, but instead want to charge for a 'business'
> account or at 
> least charge for enabling it.
>
> Setting up VPN will be _far_ more difficult if the ISP
> blocks it and 
> you don't realize it. (I'd add a "<g>" but it really can
be 
> something that doesn't bring a smile.)
>
> Tom Liotta